| Tez Türü | Yüksek Lisans |
| Ülke | Türkiye |
| Üniversite | Tokat Gaziosmanpaşa Üniversitesi |
| Enstitü | Lisansüstü Eğitim Enstitüsü |
| Anabilim Dalı | Kimya Ana Bilim Dalı |
| Tez Onay Yılı | 2026 |
| Öğrenci Adı ve Soyadı | Sefa YILMAZ |
| Tez Danışmanı | PROF. DR. CEMİL ALKAN ; DOÇ. DR. ALPER BİÇER |
| Türkçe Özet | Bu çalışmada, termal enerji depolama (TES) uygulamalarında kullanılabilen yeni, sızdırmaz, dayanıklı, nispeten ucuz ve çevre dostu PEG@TWBC@WPVC FDM (Polietilen Glikol@Çay Atığı Biyokömür@Atık Polivinil Klorür Faz Değişim Malzemesi) kompozitleri üretilmesi amaçlanmıştır. Bu amaçla, PEG4000@TWBC@WPVC, PEG6000@TWBC@WPVC ve PEG10000@TWBC@WPVC üretilmiştir. Nihai kompozitlerin üretiminden önce üretilen sızdırmaz durumdaki bileşen yüzdeleri sırasıyla %29 PEG4000@%71 TWBC, %34 PEG6000@%66 TWBC ve %35 PEG10000@%65 TWBC idi. Bu kompozitlerin %60 PEG@%40 TWBC versiyonları hazırlanmış ve daha yüksek PEG yüzdesi içeren sızdırmaz versiyonlar üretmek için 0,2 g WPVC ile kaplanmıştır. Karakterizasyonları FT-IR ve SEM analizleriyle, termal özellikleri ise DSC ve TGA analizleriyle incelenmiştir. Nihai kompozitlerin termal kararlılıkları, 25 °C-80 °C aralığında 990 termal döngüden (TC) sonra yeniden incelenmiştir. Üretilen kompozitlerin erime noktaları ve gizli ısıları sırasıyla 61,92 °C, 61,84 °C, 64,30 °C ve 91,66 J/g, 104,89 J/g, 107,92 J/g olarak bulunmuştur. |
| İlgilizce Özet | In this study, it was aimed to produce new, leak-proof, durable, relatively cheap and environmentally friendly PEG@TWBC@WPVC PCM (Polyethylene Glycol@Tea Waste Biochar@Waste Polyvinyl Chloride Phase Change Material) composites that can be used in thermal energy storage (TES) applications. For this purpose, PEG4000@TWBC@WPVC, PEG6000@TWBC@WPVC, and PEG10000@TWBC@WPVC were produced. The component percentages in the non-leaching condition produced before the production of the final composites were 29% PEG4000@71% TWBC, 34% PEG6000@66% TWBC, and 35% PEG10000@65% TWBC. 60% PEG@40% TWBC versions of these composites were prepared and coated with 0.2 g WPVC to produce non-leaching versions containing a higher PEG percentage. Their characterization was carried out by FT-IR and SEM analyses, and their thermal characteristics were investigated by DSC and TGA analyses. The thermal stabilities of the final composites were re-examined after 990 thermal cycles (TC) in the range of 25 oC-80 oC. Melting points and latent heats of the produced composites were found to be 61.92 oC, 61.84 oC, 64.30 oC and 91.66 J/g, 104.89 J/g, 107.92 J/g, respectively. |