A novel silver(I)-selective PVC membrane sensor and its potentiometric applications        
Yazarlar (3)
Prof. Dr. Ömer IŞILDAK Tokat Gaziosmanpaşa Üniversitesi, Türkiye
Prof. Dr. Nihal DELİGÖNÜL Tokat Gaziosmanpaşa Üniversitesi, Türkiye
Doç. Dr. Oğuz ÖZBEK Zonguldak Bülent Ecevit Üniversitesi, Türkiye
Makale Türü Özgün Makale
Makale Alt Türü SSCI, AHCI, SCI, SCI-Exp dergilerinde yayınlanan tam makale
Dergi Adı Turkish Journal of Chemistry
Dergi ISSN 1300-0527 Wos Dergi Scopus Dergi
Dergi Tarandığı Indeksler SCI-Expanded
Dergi Grubu Q4
Makale Dili İngilizce
Basım Tarihi 08-2019
Cilt No 43
Sayı 4
Sayfalar 1149 / 1158
DOI Numarası 10.3906/kim-1812-29
Makale Linki https://doi.org/10.3906/kim-1812-29
Özet
Silver(I)-selective sensors were prepared from a solid-state contact polyvinyl chloride (PVC) membrane. (Z) -2-(2-((3-(2-hydroxyphenyl)-5-(p-tolyl)-1 H -pyrrol-2-yl)imino)-5-(p-tolyl)-2 H -pyrrol-3-yl)phenol was synthesized as an ionophore molecule and embedded in the silver(I)-selective PVC membrane composition. The optimum membrane composition was determined as 2.5% ionophore, 61.7% bis-(2-ethylhexyl)sebacate, 1.0% potassium tetrakis (p-chlorophenyl) borate, and 34.8% PVC. The developed sensor exhibited a linear potential change E = 67.42 (–log [Ag + ]) + 1152.9 and R2 = 0.9960) in the varying concentration range of 1.0 × 10 −1 to 1.0 × 10 −5 mol L −1 silver ions. This sensor shows a detection limit of 7.3 × 10 −7 mol L −1 . The proposed sensor showed a good potential change with high sensitivity even in a wide range of pH values (2.0–11.0). The proposed sensor had a quick electrochemical response of less than 3 s with good selectivity and repeatability. The sensor was also successfully applied in the analysis of real water samples. In real water samples prepared by standard addition method, recoveries in the range of 82.30%–95.15% were obtained.
Anahtar Kelimeler
Potentiometric sensor | PVC membrane | Silver determination | Silver(I)-selective