Coating of AISI 1018 steel with the pack-boriding method
Yazarlar (3)
Arş. Gör. Ramazan ERARSLAN
Tokat Gaziosmanpaşa Üniversitesi, Türkiye
Dr. Öğr. Üyesi Uğur ÖZTÜRK
Tokat Gaziosmanpaşa Üniversitesi, Türkiye
Prof. Dr. Fikret YILMAZ
Tokat Gaziosmanpaşa Üniversitesi, Türkiye
| Makale Türü |
Özgün Makale
|
| Makale Alt Türü | Diğer hakemli uluslarası dergilerde yayınlanan tam makale |
| Dergi Adı | Journal of New Results in Science |
| Dergi ISSN | 1304-7981 |
| Dergi Tarandığı Indeksler | WorldCat, ResearchBip, Publons, Journal Factor, Journal Index, Cite Factor |
| Makale Dili | İngilizce |
| Basım Tarihi | 01-2023 |
| Cilt No | 12 |
| Sayı | 1 |
| Sayfalar | 14 / 21 |
| DOI Numarası | 10.54187/jnrs.1219301 |
| Makale Linki | http://dx.doi.org/10.54187/jnrs.1219301 |
| Özet |
| In this study, AISI 1018 steel with low carbon content was coated with the pack-boriding method at 950 °C for 2h and 4h. A two-layer structure was observed in the 2h boronized material: the thin FeB phase and the more prominent Fe2B phase. In addition to this two-phase structure, undesirable phases (SiC and Fe3O4) were detected in the material boronized for 4h. It was observed that the wear resistance and hardness of the boronized materials increased greatly, which is explained by the hard FeB and Fe2B phases. In addition, as the heat treatment time increases, the thickness of the FeB phase increases while the thickness of the Fe2B phase decreases. |
| Anahtar Kelimeler |
| AISI 1018 steel | Pack boriding | Wear properties | Hardness |
BM Sürdürülebilir Kalkınma Amaçları
| Atıf Sayıları | |
| Google Scholar | 1 |