Fabrication of Al 20wt Si powder using scrap Si by ultra high energy milling process
Yazarlar (5)
Kongju National University, Güney Kore
Prof. Dr. Fikret YILMAZ
Tokat Gaziosmanpaşa Üniversitesi, Türkiye
Kongju National University, Güney Kore
Kongju National University, Güney Kore
Kongju National University, Güney Kore
| Makale Türü | Özgün Makale |
| Makale Alt Türü | SSCI, AHCI, SCI, SCI-Exp dergilerinde yayınlanan tam makale |
| Dergi Adı | JOURNAL OF ALLOYS AND COMPOUNDS |
| Dergi ISSN | 0925-8388 Wos Dergi Scopus Dergi |
| Dergi Tarandığı Indeksler | SCI-Expanded |
| Dergi Grubu | Q4 |
| Makale Dili | İngilizce |
| Basım Tarihi | 09-2012 |
| Cilt No | 536 |
| DOI Numarası | 10.1016/j.jallcom.2012.01.106 |
| Makale Linki | http://linkinghub.elsevier.com/retrieve/pii/S0925838812001788 |
| Özet |
| In this study, microstructural evolution and mechanical properties of Al-20 wt%Si and pure Al powders fabricated by ultra high-energy ball milling technique were investigated as a function of milling time. The microstructure and mechanical properties of the as-milled powders were examined by scanning electron microscope (SEM), energy dispersive spectrometry (EDS), X-ray diffractometer (XRD) and Vickers hardness tester. SEM observation showed that the particle size increased at an early stage of milling, and then decreased drastically with further milling. XRD and cross-sectional EDS-mapping analyses revealed that Si particles were not dissolved but uniformly dispersed in the Al matrix in a milled state. Vickers hardness of both pure Al and Al-Si powder increases with milling time, which attributes to the grain size strengthening and dispersion strengthening. © 2012 Elsevier B.V. All rights reserved. |
| Anahtar Kelimeler |
| Al-20Si | Mechanical properties | Microstructure | Milling time | Ultra-high energy ball milling |
Science Direct
Fabrication of Al 20wt Si powder using scrap Si by ultra high energy milling process
BM Sürdürülebilir Kalkınma Amaçları
| Atıf Sayıları | |
| WoS | 25 |
| SCOPUS | 28 |
| Google Scholar | 38 |