The use of different ionophores for the determination of Zn2+ ions      
Yazarlar (3)
Prof. Dr. Ömer IŞILDAK Tokat Gaziosmanpaşa Üniversitesi, Türkiye
Furkan Bedir Egeli
Tokat Gaziosmanpaşa Üniversitesi, Türkiye
Doç. Dr. Oğuz ÖZBEK Zonguldak Bülent Ecevit Üniversitesi, Türkiye
Makale Türü Açık Erişim Özgün Makale
Makale Alt Türü SCOPUS dergilerinde yayınlanan tam makale
Dergi Adı Sensors International
Dergi ISSN 2666-3511 Scopus Dergi
Dergi Tarandığı Indeksler Scopus
Makale Dili İngilizce
Basım Tarihi 07-2022
Cilt No 3
Sayı 1
Sayfalar 100195 / 0
DOI Numarası 10.1016/j.sintl.2022.100195
Makale Linki http://dx.doi.org/10.1016/j.sintl.2022.100195
Özet
In this study, poly(vinly chloride) (PVC) membrane ion–selective electrodes for the determination of zinc(II) ions were prepared using potassium hydrotris(N-tert-butyl-2-thioimidazolyl)borate (L1), 1-[Bis(dimethylamino)methylen]-5-chlorobenzotriazolium-3-oxide hexafluorophosphate (L2), 1,4,8,12-tetraazacyclopentadecane (L3) and tetrabutylthiuram disulphide (L4) ionophores. Based on potentiometric performance properties, the optimum membrane composition was determined as 8.0% tetrabutylthiuram disulphide (L4), 58.0% o–nitrophenyloctylether (o–NPOE), 33.5% PVC and 0.5% potassium tetrakis (p–chlorophenyl) borate (KTpClPB). The electrode exhibits a wide concentration range from 1.0 ​× ​10−5 to 1.0 ​× ​10−1 ​M, and has a detection limit of 6.50 ​× ​10−6 ​M. The proposed electrode has a very quickly response time of 5s, good repeatability and selectivity. In addition, the electrode works in the wide pH range of 5.0–10.0 without being affected by pH changes. Finally, the developed zinc(II)–selective electrode was successfully used for the determination of zinc(II) in a drug sample.
Anahtar Kelimeler
Ionophore | Ion–selective electrodes | Potentiometry | PVC membrane | Zinc(II)