Radiation hardness measurements of high OH content quartz fibresirradiated with 24 GeV protons up to 1 25 Grad
Yazarlar (9)
K. Cankoçak University Of Iowa, Amerika Birleşik Devletleri
Doç. Dr. Mustafa Numan BAKIRCI Tokat Gaziosmanpaşa Üniversitesi, Türkiye
S. Çerçi Çukurova Üniversitesi, Türkiye
E. Gülmez Boğaziçi Üniversitesi, Türkiye
J. P. Merlo University Of Iowa, Amerika Birleşik Devletleri
Y. Onel
University Of Iowa, Amerika Birleşik Devletleri
F. Özok Istanbul Üniversitesi, Türkiye
I. Schmidt University Of Iowa, Amerika Birleşik Devletleri
N. Sönmez
Ege Üniversitesi, Türkiye
Makale Türü Özgün Makale (SSCI, AHCI, SCI, SCI-Exp dergilerinde yayınlanan tam makale)
Dergi Adı Nuclear Instruments and Methods in Physics Research Section A Accelerators Spectrometers Detectors and Associated Equipment (Q4)
Dergi ISSN 0168-9002 Wos Dergi Scopus Dergi
Dergi Tarandığı Indeksler SCI
Makale Dili İngilizce Basım Tarihi 01-2008
Cilt / Sayı / Sayfa 585 / 1 / 20–27 DOI 10.1016/j.nima.2007.10.024
UAK Araştırma Alanları
Yüksek Enerji ve Parçacık Fiziği
Özet
We investigated the darkening of two high OH- content quartz fibres irradiated with 24 GeV protons at the Cern PS facility IRRAD. The two tested fibres have a 0.6 mm quartz core diameter, one with hard plastic cladding (qp) and the other with quartz cladding (qq). These fibres were exposed at about 1.25 Grad in 3 weeks. The fibres became opaque below 380 nm and in the range 580-650 nm. The darkening under irradiation and damage recovery after irradiation as a function of dose and time are similar to what we observed with electrons. The typical attenuation at 455 nm are 1.44 ± 0.22 and 2.20 ± 0.15 dB / m at 100 Mrad for qp and qq fibres, respectively. The maximum damage recovery is also observed near this wavelength. © 2007 Elsevier B.V. All rights reserved.
Anahtar Kelimeler
Attenuation | Fibre | Quartz | Radiation