Wear behavior of Ni-B coated-hard anodized Al7Si alloy and machining performance with ZrN ceramic film coated carbide tool
Yazarlar (6)
Öğr. Gör. Yunus Eren IŞILDAK Erzurum Technical University, Türkiye
T. Oğuzhan Ergüder Erzurum Technical University, Türkiye
Gürkan Kaya Erzurum Technical University, Türkiye
İlyas Hacısalihoğlu Erzurum Technical University, Türkiye
Bora Yay Cms Jant ve Makina San. A.S., Türkiye
Fatih Yıldız Erzurum Technical University, Türkiye
| Makale Türü | Özgün Makale (SSCI, AHCI, SCI, SCI-Exp dergilerinde yayınlanan tam makale) | ||
| Dergi Adı | Surfaces and Interfaces (Q1) | ||
| Dergi ISSN | 2468-0230 Dergi Bilgileri (2020) | ||
| Dergi Tarandığı Indeksler | SCI | ||
| Makale Dili | İngilizce | Basım Tarihi | 12-2020 |
| Kabul Tarihi | – | Yayınlanma Tarihi | 01-12-2020 |
| Cilt / Sayı / Sayfa | 21 / 1 / 1–11 | DOI | 10.1016/j.surfin.2020.100768 |
| Makale Linki | https://www.sciencedirect.com/science/article/pii/S2468023020307604 | ||
| UAK Araştırma Alanları |
Katı Cisimler Mekaniği
Üretim Teknolojileri
|
||
| Özet |
| In this study, it is aimed to increase the wear resistance of Al7Si alloy, which is widely used in the manufacturing industry, with different surface treatments and to propose an effective and economical cutting tool coating for machining process of the alloy. Accordingly, precipitation hardening heat treatment, Hard Anodizing and Ni-B coating processes were applied to cast Al7Si alloy samples. The structural, mechanical and tribological properties of the samples were characterized after the surface treatments. Also, the machining performance of Al7Si alloy with uncoated and ZrN ceramic film coated carbide end mills was investigated. The milling processes were performed to determine the actual working performance of the tools. SolidCAM i-machining module, which has become widespread recently, was used as intelligent machining instead of the tool paths used in traditional methods. After the precipitation … |
| Anahtar Kelimeler |
| Al7Si alloy | electroless Ni-B coating | hard anodizing | machining | wear | ZrN coating |
Science Direct
Wear behavior of Ni-B coated-hard anodized Al7Si alloy and machining performance with ZrN ceramic film coated carbide tool
| Atıf Sayıları | |
| Web of Science | 6 |
| Scopus | 8 |
| Google Scholar | 8 |