Assesment Clay Bricks Compressive Strength Using Quantitative Values of Colour Components
Yazarlar (3)
Prof. Dr. Sedat KARAMAN Tokat Gaziosmanpaşa Üniversitesi, Türkiye
H. Gunal
Tokat Gaziosmanpaşa Üniversitesi, Türkiye
Tokat Gaziosmanpaşa Üniversitesi, Türkiye
S. Ersahin
Tokat Gaziosmanpaşa Üniversitesi, Türkiye
Tokat Gaziosmanpaşa Üniversitesi, Türkiye
| Makale Türü | Özgün Makale (SSCI, AHCI, SCI, SCI-Exp dergilerinde yayınlanan tam makale) | ||
| Dergi Adı | Construction and Building Materials (Q4) | ||
| Dergi ISSN | 0950-0618 Wos Dergi Scopus Dergi | ||
| Dergi Tarandığı Indeksler | SCI-Expanded | ||
| Makale Dili | İngilizce | Basım Tarihi | 01-2006 |
| Cilt / Sayı / Sayfa | 20 / 5 / 348–354 | DOI | 10.1016/j.conbuildmat.2004.11.003 |
| Makale Linki | http://www.sciencedirect.com/science/article/pii/S0950061805000553 | ||
| Özet |
| This study was conducted to assess the relationships among firing temperature, colour components and compressive strength of bricks. Lightness (L*) and chromaticity (a* and b*) of 10 replicated brick samples fired at temperatures 700–1050°C in steps of 25°C under free access of air, were measured with a colorimeter, which uses an L*a*b* colour space. Increasing firing temperature significantly increased the compressive strength of bricks. The values of L* slightly increased with firing temperature up to around 800°C then decreased as temperature increased further. The values of b* and a* increased with increasing firing temperature up to around 900°C then rapidly decreased with further increases in firing temperature. A negative relationship occurred between each of L*, a*, and b* and compressive strength. Compressive strength was adequately described by colour components of L* and b* by linear … |
| Anahtar Kelimeler |
| Brick | CIE L* a* b* | Colour | Compressive strength | Firing temperature |
Science Direct
Assesment Clay Bricks Compressive Strength Using Quantitative Values of Colour Components
| Atıf Sayıları | |
| Google Scholar | 133 |
| Scopus | 22 |