The impact of various surface treatments and Er-YAG laser irradiation on the bond strength of resin matrix CAD/CAM ceramics to resin cement
Yazarlar (2)
Dr. Öğr. Üyesi İlknur USTA KUTLU
Tokat Gaziosmanpaşa Üniversitesi, Türkiye
Doç. Dr. Kaan YERLİYURT
Tokat Gaziosmanpaşa Üniversitesi, Türkiye
| Makale Türü |
Özgün Makale
|
| Makale Alt Türü | SSCI, AHCI, SCI, SCI-Exp dergilerinde yayınlanan tam makale |
| Dergi Adı | LASERS IN MEDICAL SCIENCE |
| Dergi ISSN | 0268-8921 Wos Dergi Scopus Dergi |
| Dergi Tarandığı Indeksler | SCI-Expanded |
| Dergi Grubu | Q1 |
| Makale Dili | Türkçe |
| Basım Tarihi | 01-2025 |
| Cilt No | 40 |
| Sayı | 1 |
| Sayfalar | 201 / 213 |
| DOI Numarası | 10.1007/s10103-025-04460-5 |
| Makale Linki | https://pmc.ncbi.nlm.nih.gov/articles/PMC12011928/pdf/10103_2025_Article_4460.pdf |
| Özet |
| The aim of the study was to assess the impact of various surface treatments, including an Er: YAG laser with different power outputs, on the shear bond strength (SBS) of different resin matrix CAD/CAM ceramic materials to resin luting cement. Specimens from Lava Ultimate (LU) and Vita Enamic (VE) were categorized based on the surface treatment: no treatment, sandblasting (Sb), 10% hydrofluoric acid (Ac) etching, sandblasting followed by acid etching (Sb + Ac), and Er: YAG laser irradiation at 2 W and 3 W (L1, L2). Scanning electron microscopy (SEM) evaluation and roughness measurement of the samples were performed. Silane was applied to half of the specimens, resin cement was bonded and SBS testing was performed. The SBS did not differ depending on the material (P = 0.081), but varied according to the surface treatment (P < 0.001). The highest mean SBS value was observed in the Sb + Ac (15.20) group. The highest roughness median was in Sb of VE, which was similar to Sb + Ac and Sb of all materials. Applying Sb and Ac together was more effective than applying them separately. Although 2 W and 3 W Er-YAG applications were ineffective for treating VE's surface, 2 W Er-YAG applications can be suggested for LU. The combined application of Sb and Ac is more effective than their individual applications and laser irradiation in terms of resin matrix CAD/CAM ceramics retention. |
| Anahtar Kelimeler |
| Shear bond strength | Er-YAG laser | Resin matrix ceramic | Resin nanoceramic | Polymer infiltrated ceramic |
BM Sürdürülebilir Kalkınma Amaçları
| Atıf Sayıları | |
| WoS | 1 |